The diesel tanks for generating sets are of the horizontal development type, equipped with four feet of support. These diesel tanks for genset are welded by automatic welding procedures in order to ensure the highest level of safety in terms of tightness. All diesel tanks for generators are previously treated with two layers of rust and two layers of enamel and are individually tested at a pressure of 1 bar. Available capacities: 490, 1100, 2100, 3400, 5700, 7000 and 8980 lt.
Diesel fuel tanks for generating sets are equipped with: upper wheelbase with a diameter of 400 mm and upper coupling intended for the fuel load with a ring that can be hermetically closed, upper flame cutter with grid, in addition N-2 sleeves 1″ for suction and return; grounding connection; ring with quick coupling 3″Lockable; vent with grate breaker; mechanical level indicator, visible externally with internal protection tube for the float; 1″ bottom drain for any periodic cleaning with safety cap; 1 sleeve”positioned 10 cm from the bottom exhaust for possible suction from below equipped with bottom valve; ground and equipotential connection. Overflow valve calibrated to 90% filling degree.
Containment basin: entirely made of S235JR UNI EN 10025 designed for the insertion of bolted pillars that allow the fixing of the roof. Designed in proportion to the capacity of the tank has dimensions equal to 110% of the contents of the tank, in accordance with the safety requirements of D.M. 22.11.2017. It is equipped with: ground connection and outlet ball valve for purging in case of maintenance. The structure is coated with two coats of epoxy primer and then, after phosphating, has been painted. RAL 6018 green for tank and basin containment
Protective roofing: complete with 4 vertical pillars and galvanized upper frame; galvanized corrugated iron, to protect the tank from atmospheric agents
Maintenance and operating instructions are included in the tank, as well as a certificate of conformity approved by the Ministry of Interior and other certifications that comply with applicable standards.
